crankshaft是什么意思 crankshaft的翻译、中文解释

  crankshaft是什么意思 crankshaft的翻译、读音、例句、中文解释

  意思:曲轴,指内燃机等发动机中的主轴,通过连杆驱动汽缸活塞上下运动,从而传递动力。

  词性:名词

  常用场景:机械工程、工业生产、汽车制造等领域。

  词组搭配:

  - camshaft and crankshaft (凸轮轴和曲轴)

  - ton and crankshaft embly (活塞和曲轴总成)

  - four-stroke engine crankshaft (四冲程发动机曲轴)

  - forged steel crankshaft (锻钢曲轴)

  相关短语:

  - crankshaft position sensor (曲轴位置传感器)

  - crankshaft pulley (曲轴皮带轮)

  - crankshaft bearing (曲轴轴承)

  - crankshaft rotation (曲轴旋转)

  发音拼写:[kr??k??ft]

  翻译:曲轴

  读音:/kr??k??ft/

  例句:

  1. The crankshaft is a very important component of an engine.

  曲轴是发动机的一个非常重要的组成部分。

  2. The mechanic was able to repair the damaged crankshaft.

  机修工能够修理受损的曲轴。

  3. The design of the crankshaft has evolved over the years to improve engine efficiency.

  曲轴的设计随着年代的推移一直在演变,以提高发动机的效率。

  crankshaft在中文中有”机轴、曲轴组件”的意思,在日常中也代表”曲轴”的意思,在线发音:[‘kr??k??ft],crankshaft是一个英语名词,在《牛津英汉双解词典》中,共找到27个与crankshaft相关的例句。

  1.机轴

  例句:A crank arm is the offset portion of a crankshaft to which connecting rod and position are attached. (曲柄臂是曲轴连接臂,其中安装连杠和活塞。)

  2.曲轴组件

  例句:Fatigue fracture is the main form of failure of the crankshaft of spheroidal graphite cast iron in 195 model diesel engine. (195型柴油机球墨铸铁曲轴的失效形式,主要是疲劳断裂。)

  3.曲轴

  例句:The last is perfecting the old quality control flow of the crankshaft by adding the improved result. (最后,本文还对项目原有的质量控制流程进行了优化和完善,固化了改进成果。)

  4.曲柄轴、曲轴

  例句:The engine had a broken crankshaft. (翻译:发动机的曲轴断了。)

  crankshaft一般作为名词使用,如在engine crankshaft(发动机曲轴)、inside crankshaft(内曲轴)、offset crankshaft(偏位曲轴)等常见短语中出现较多。

  engine crankshaft发动机曲轴inside crankshaft内曲轴offset crankshaft偏位曲轴overhang crankshaft[网络] 外伸曲轴primary crankshaft初级曲轴reconditioning of crankshaft曲轴修正solid crankshaft实心曲轴speed of crankshaft[化] 曲轴转速split crankshaft组合曲轴1. The last is perfecting the old quality control flow of the crankshaft by adding the improved result. (翻译:最后,本文还对项目原有的质量控制流程进行了优化和完善,固化了改进成果。)

  2. The engine had a broken crankshaft. (翻译:发动机的曲轴断了。)

  3. Fit chain drive sprocket on the crankshaft. (翻译:将链条驱动链轮安装到曲轴上。)

  4. Semifinished main bearings require finishing and fitting after installation, so that the crankshaft must be taken out. (翻译:半精加工的主轴承安装后需要修整和调配,这样曲轴就必须拆下。)

  5. The front-teeth time and the back-teeth time of the crankshaft are compared to find the missing teeth by gradient. (翻译:通过对比曲轴前后齿的齿时间,利用梯度找出缺齿。)

  6. The oil pan and the lower part of the cylinder Block together are called the crankcase; they enclose, or encase , the crankshaft. (翻译:油盘和气缸体的下部共同称为曲轴箱,用来封闭或罩住曲轴。)

  7. Considering the deformation during the engine crankshaft fillet rolling, theories for changeably load rolling are put forward. (翻译:分析曲轴圆角滚压的强化机理,考虑加载过程中存在的塑性变形,提出变力滚压,并加以探讨分析。)

  8. Pistons, suspension, timing belt, crankshaft, and redo the valves, the head needs new spark plugs… (翻译:活塞、悬吊 正时皮带、曲轴,还有 气阀要重做,)

  9. It is interlocked with the crankshaft via the chain drive. (翻译:它通过链条驱动机构与曲轴互锁在一起。)

  10. As the crankshaft rotates, the crankpin swings in a circle around the shaft. (翻译:随著曲轴的转动,曲柄销绕主轴作圆周摆动。)

  11. Esther, I’m going to the garage now to pick up the crankshaft for the tractor. (翻译:Esther,我现在要去车库 收拾拖车的曲轴)

  12. And with custom-machined heads, custom camshafts and a billet crankshaft, it’s hard to argue you’re not getting your money’s worth. (翻译:与定制加工元首,自定义凸轮轴和曲轴坯,很难说你没有得到你的钱值得。)

  13. Remove the crankshaft oil slinger. (翻译:拆去曲轴抛油环。)

  14. Remove chain drive wheel from crankshaft. (翻译:从曲轴上拆下链条驱动轮。)

© 版权声明 本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如有侵权请联系邮箱:2245678901@qq.com删除!联系电话:13296555055。
搜索
打开微信,扫描左侧二维码,关注【gxwhjdjt】,发送【101】获取验证码,输入获取到的验证码即可解锁复制功能,解锁之后可复制网站任意一篇文章,验证码每月更新一次。
提交